Wednesday, November 27, 2019

History Of Psychoanalysis Essays - Freudian Psychology,

History of Psychoanalysis The history of the major discoveries in psychoanalysis is largely interwoven with the life and professional career of a single man, Sigmund Freud. The book Studies on Hysteria actually marks the beginning of psychoanalysis, although the term was not used by Freud until a year later (1896). Prior to this time, he spoke of ?Breuer's cathartic method,? and occasionally of ?psychical analysis.? By 1896, Freud had made some notable changes in the original technique. For one thing, he had given up the use of hypnosis. He had found that some patients could not by hypnotized readily, and the results at other times had been disappointing. Secondly, he had observed that, while hypnosis suspended the patient's resistance to recalling painful feelings and memories, the gains were only temporary. Thirdly, he had a temperamental distaste for the magical connotations that always surrounded the hypnotic state. Instead he modified the technique, asking the patients simply to report as faithfully and unreservedly as possible what occurred to them while in his presence. To keep distractions to a minimum and to insure the greatest possible relaxation, he asked the patient to recline on a couch, sitting behind him, out of his field of vision. He had also noted that when the patients diligently followed what came to be known as ?the fundamental rule,? their associations regularly began to turn to personal and troublesome matters, ultimately leading to the core of their neurotic difficulties. The new method of free association (although the associations were not ?free? in the usual sense) was as simple as it was ingenious. The term psychoanalysis as a method treatment is inseparable from the technique of free association. Psychoanalysis, however, has at least two additional meanings, which soon came to the fore. The first grew out of the treatment of hysteria, and to this date, psychoanalysis is identified as a specific and specialized form of psychotherapy. The second meaning, while related to the first, is nevertheless a different one. Psychoanalysis, in this sense, is a method for investigating the working of the human mind, and as such constitutes a remarkable breakthrough in psychological research. Here for the first time was a technique for gaining access to layers of the mind which had hitherto been hidden from direct observations, and which provided highly revealing insights into the origins of the human personality as well as the causes of neurotic conflicts. Thus psychoanalysis in the hands of Freud gradually led to a new understanding and appreciation of the tremendous importance of early childhood in shaping the human personality. The third meaning refers to psychoanalysis as a theory of personality. Searching for a method to treat hysterical patients, Freud was brought face-to-face with the mainsprings of the human mind. By the end of the century he still has not given up hope of reducing psychological phenomena to the laws of physics and chemistry, but eventually he made a clean break and became a psychological investigator who attempted to explain psychological phenomena in psychological terms. Again, this was an achievement of the first order, which is not always fully appreciated.(Freud and Modern Psychoanalysis, 1,7-11)

Sunday, November 24, 2019

Cause Effect Analysis Essays

Cause Effect Analysis Essays Cause Effect Analysis Essay Cause Effect Analysis Essay As an operator who works in oil and gas industry, I will present a life incident in one of the oil and gas location called Piper Alpha disaster UK. Piper Alpha was a North Sea oil production platform operated by Occidental Petroleum (Caledonia) Ltd. The disaster began with a routine maintenance procedure. On the morning of the 6th of July, a certain backup propane condensate pump in the processing area needed to have its pressure safety valve checked. The work could not be completed by 18. 00 and the workers asked for and received permission to leave the rest of the work until the next day. The tube was sealed with a plate. Later in the evening during the next work shift, the primary condensate pump failed. None of those present were aware that a vital part of the machine had been removed and decided to start the backup pump. Gas products escaped from the hole left by the valve and lead to an explosion and resulting fire that destroyed the platform on July 6, 1988, killing 167 men, with only 59 survivors. The death toll includes 2 crewmen of a rescue vessel. Total insured loss was about ? 1. 7 billion (US$ 3. 4 billion). The generation and utilities module, which included the fireproofed accommodation block, slipped into the sea. The largest part of the platform followed it; the whole accident took place in 22 minutes. That was the end of Piper Alpha. What went wrong? The fishbone diagram identifies some possible cause and effect. METHOD/PROCEDURE ENVIRONMENT MATERIAL MANPOWER MACHINE Poor leadership Poor maintenance PTW risk assessment use incorrect Absence of blast wall Inadequate maintenance/safety procedure Poor practice /audit complacency Lack of communication between crew shift Lack of training Deluge fire system turnoff Primary condensate pump failed No quality checking on production line Poor production planning Poor isolation of maintenance Heat, smoke and fire Hazardous area Carbon monoxide/fumes Piper Alpha disaster UK Using the cause and effect analysis tool, as defining the problem first, brainstorming as the second step and Identify cause, I and my teams outline some of the major challenges for oil and gas facilities, which fall into two categories. The first is overcoming the physical environment. The second is doing this in a manner that meets regulatory requirements and increasing societal expectations related to environmental performance and social benefits. This report was instrumental in bringing about the regulatory control of Offshore Installations (Safety Case) Regulations. A safety case is a written document in which a company must demonstrate that an effective safety management system (SMS) is in place on a particular offshore installation. With respect to the first of these challenges, significant progress has been made through the development of ISO Draft International Standard, addressing design, construction, transportation, installation, and removal of offshore structures, related to the activities of the petroleum and natural gas industries. Focus areas for advancement and extension of Oil and Gas development include: ? Adherence to Permit-to-Work SystemThis was a system of paperwork designed to promote communication between all parties affected by any maintenance procedure done on the platform. The system on Piper Alpha had become too relaxed. Employees relied on too many informal communications and communication between shift changes was lacking. ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Disabling of protective equipment by explosion The firewalls on Piper Alpha could have stopped the spread of a fire. They were, however, not built to withstand an explosion. The initial blast blew the firewalls down, and the subsequent fire spread unimpeded.? Need for safety trainingThe workers on the platform were not adequately trained in emergency procedures, and management was not trained to make up the gap and provide good leadership during a crisis situation.? Auditing is vitalOccidental Petroleum had regular safety audits of its facilities but they were not performed well. Few, if any, problems were ever brought up, even though there were serious issues with corrosion of deluge system pipes and heads and many other issues. When a major problem was found, it was sometimes just ignored.? Proper isolation of plant for maintenanceThe disaster would not have occurred if the pump where work was being done had been positively isolated. Isolation is not achieved by shutting a valve but requires means such as insertion of a slip plate or removal of a pipe section.? Emergency Shutdown ValvesProper location of emergency shutdown valves and backup valves are essential to cutting off fuel supply in case of a fire; above water positioning provides testing accessibility for vigilant maintenance.? Fire and explosion protectionProtection against and mitigation of fire and explosion as well as fire fighting are of particular importance as there is no possibility to rely on outside assistance, such as the fire brigade.? Temporary Safe Refuge (TSR)TSR on each installation should have a breathable atmosphere through prevention of smoke ingress and provision of fire protection; escape routes and embarkation points should be determined through safety cases. Prevention of smoke ingress into TSR is available through smoke and gas detectors that initiate smoke dampers and prevent circulation of smoke throughout the TSR.? Evacuation and EscapeMore than one route to helicopters and lifeboats must be present at any given time to ensure evacuation of the platform in a crisis situation. To facilitate escape from a hazardous situation, luminescent strips and heat shielding provide visibility in smoke and protection from flames, respectively. Secondary escapes such as ropes, ladders, and nets are also available as backup for the more sophisticated escape methods. ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Use of wind tunnel tests and explosion simulations in designWind tunnels are useful to assess the effectiveness of the ventilation and the gas detection system. The explosion simulations help investigate the effect of different layouts on explosion overpressures and assess the effectiveness of blast walls. If all oil and gas industry embrace this new regulatory, which should address the risk of series of explosion event scenarios. This produces an approach more commensurate with that of quantitative risk analysis and away from the â€Å"worst case† scenario. It also puts explosion risks into context. Beside give training and seminars to new and old employees alike. Have people check employees’ performances in a given period. Have a computer-based information system to maintain the organization and staff awareness. It will not only give you back-up files but make the system work faster. Make sure it is maintained and updated at all times.

Thursday, November 21, 2019

Essay on Government Borrowing Example | Topics and Well Written Essays - 1000 words

On Government Borrowing - Essay Example The government borrows majorly through issuing treasury bills, Canada Savings Bonds, and marketable bonds in domestic and foreign markets. The Financial Administration Act dictates that Governor in Council has the mandate to authorize the Minister to borrow money on behalf of Her Majesty in the right of Canada. The government borrowing has been too high and the interest is very low. The government Canada reported a net debt of approximately $ 616.9 billion in the fiscal year 2010-11. This was a rise by $ 34.4 billion from 2009-10. Canada’s total government net debt-to-GDP ratio hit 30.4 per cent in the year 2010 (Department of Finance of Canada, 2012). This paper will explore the issue of high government borrowing and low interest rates. It will give economic measures to tackle the problem in Canada. The level of government borrowing is crucial ingredient of fiscal policy and management of aggregate demand in any economy. When an individual government runs a budget deficit, it implies that in that fiscal year, total government spending exceeds total tax revenue. When a government experiences a deficit in its budget estimates, it has to borrow in order to bridge the gap. This forces the government to issue its debt as Treasury Bills and long-term government bonds through central bank. The negative effects of Canadian government’s high borrowing are duplicated in the in the financial statements of the country. In the 31 March 2011, the Department of Finance of Canada announced that interest-bearing debt was $ 801.8 billion. This was an increase by $ 39.0 billion from the year 2010. Similarly, the un-matured debt was higher by 32.0 Canadian dollars. In addition, liabilities for pension and other benefits for employees went higher by 7.3 billion Canadian dollars. Increase in government borrowing through issuing of bonds such as treasury bills and securities to pay interest in fixed period or indefinitely (Department of Finance of Canada, 2012). Canada has not registered positive results fiscal stimulus. The economic stimulus seems it is not effective. The government borrowing has led to low interest rates making government run a budget deficit. In addition, fiscal stimulus has demonstrated inflationary effects that results from high demand. Fiscal stimulus entails the proposition that through borrowing money and spending it, the government can raise the state of economy. This is through raising inputs and lowering the numbers of jobless. Fiscal stimulus can increase aggregate demand. Theoretically, printing money can be a form of fiscal stimulus. This is because money counts as a transfer payment. People will have a lot of money because of increased printing. However, in practice people do not just keep many dollars of their extra cash. People will spend the extra amount of money creating demand for services and goods. The increased aggregate demand leads to inflation. This is the state bedeviling Canada. The high borrowing of g overnment seems to create problems rather than to develop economy in Canada. When the government borrows money from private sector this corresponds to increase in spending on its part. However, government borrowing limits the spending of private sector. This therefore implies that job opportunities, which fiscal stimulus seeks to created are offset through decline in private spending. Canada is grappling with the same situation. Too much borrowing seems to impair the